This website uses cookies to enhance your experience.

PF-5.250P

Item No. 317775
puriFlash 5.250P Optimized for your flash and preparative purifications of complex mixtures of peptides and oligonucleotides - Flow rate 125 ml/min - Max. pressure 250 bar Components - Control unit - Pump - UV detector - Fraction collector - Solvent tank - 2 integrated column supports - 2 integrated
Read full description
This product cannot be ordered at the moment.
Description
puriFlash 5.250P
Optimized for your flash and preparative purifications of complex mixtures of peptides and oligonucleotides
- Flow rate 125 ml/min
- Max. pressure 250 bar


Components
- Control unit
- Pump
- UV detector
- Fraction collector
- Solvent tank
- 2 integrated column supports
- 2 integrated dry load mounts

Pump
- Flow rate : 125 mL/min
- Optimum flow rate for columns up to 60 mm internal diameter
- Max. pressure: 250 bar
- Quaternary gradient valve
- Air vent
- Wash discs
- Wash pump for water circulation to prevent crystalline deposits on the pump pistons (included in the PWD pack)
- Solvent heater (under development)

Injection
- Injection mode: liquid or solid
- “Load & Go” technology: with automatic 10-way valve that allows the use of staggered dry load or loops for a more efficient injection
- RFID technology: automatic detection of the dry loads and the injection loops
- Stainless steel injection loops

Detection
- UV detector 200-400 nm
- UV detector 200-800 nm (included in the UVextended pack)
- “DAD” technology
- Multi-wavelength and scan over a band of 200 nm (or 600 nm with the UVextended pack)
- Spectral visualization and confirmation of purity
- 1.0 mm optical path cell
- Integrated ELSD detector (included in the iELSD pack)

Compatibility of columns and support
- Particle sizes: 2.6 µm, 5 µm, 10 µm, 15 µm +
- Format: all Flash and preparative columns up to an internal diameter of 60 mm and the analytic columns with a diameter of 4.6 mm are compatible
- 2 integrated column supports
- RFID technology: automatic detection of the columns during insertion

Fraction collector
– 3 racks
– 132 tubes (18 x 150 mm)
– Drainage system for the fraction collector
– Automatic cleaning of the fraction collector needle (to avoid cross-contamination with the previous purification)
– RFID technology: automatic detection of the racks installed in the collector

Proposed racks

Rack for tubes:
- 13 x 73 mm | 13 x 100 mm | 16 x 150 mm
- 18 x 150 mm | 21 x 150 mm | 25 x 150 mm
- 28 x 150 mm | 29.5 x 200 mm
- Rack for Schott laboratory bottles 250 mL
- Rack for funnels
- Position of the numbered tubes (to facilitate identification of the tubes)

Software and control unit
- Controlled by InterSoftX software
- Remote control
- 15“ touchscreen
- 8 USB ports
- “Flash & Go“ technology: compatible with our smartphone app TLC to Flash & Prep

System optimization
- Tubes with 0.75 mm internal diameter
- Optical path length detection cell: 1.0 mm / 20 µl

Safety
- Level detector for solvents
- Retention tank for solvents on the pump and valves with leak detectors (pump, UV detector, valves and collector)
- Collector with drainage system
- “Fume Encloser” technology (allows use of the purification system without the extractor hood)

Communication
- Network cable RJ45
- Communication cable Sub-D9 male/female
- Communication cable Sub-D9 female/female
- 8 USB ports
Specifications
Brand INTERCHIM
External reference PFG5Q0
Product Category Instruments
Product Group Preparative chromatography
Storage conditions 1. Store at Ambiant t°
Transport conditions 1. Standard
Landing page product 1009
    Loading
    Loading